| Production
Intercom - New Products
|
| Production
Intercom is proud to present two new innovations in the party
line intercom arena. The AD 950 Telco Interface and The
IP 900 Connect Internet to Intercom Interface. |
 |
AD950
A whole new meaning to phoning
it in.
The AD950 allows communications
from your intercom system to a landline, cell phone,
telephone network, or conference phone device. The external
party may dial in to the intercom system and participate
as if they were there.
The AD950 is a simplified
telephone interface dedicated specifically to connect
a Production Intercom (or compatible) intercom system
to a telephone line. It is powered by the intercom power
supply and the phone line and needs no external power
source. It connects to the intercom just as if it were
another intercom beltpack via the rear panel 3-pin female
XLR. A male XLR is provided for looping onwards to another
intercom station, in case it is more convenient to locate
the telephone connection somewhere other than at the
end of the system. |
A
double RJ11 jack sits between the XLRs. One is used
to connect to a live telco jack while the other is used
(if desired) to add an inexpensive telephone to initiate
the connection from the intercom site.
The front panel has three
LEDs: green to indicate that DC power from the intercom
power supply is present; yellow to indicate that the
AD950 is On Hook (hung up); and red to indicate that
a call is being received. Connection is made by simply
moving the Hook switch from On to Off. Includes
standard 3 year limited warranty.
|
|
|
 |
IP900
The www.Solution for
your InterCom
Production Intercom is proud
to announce the addition of the IP900 Connect. The
IP900 Internet/Intercom Interface provides any Internet
capable device the ability to become part of your
intercom system.
Internet capable devices such
as laptop computers or smart phones located virtually
anywhere in the world can signal, call, and listen
to your intercom system as if they were there.
|
The remote party can communicate
with the click of a mouse, stylus, or any input device.
The remote computer can be equipped with the Production
Intercom DMH220 USB communications headset, connected
directly to the USB port. Portable devices can be
equipped with the Production Intercom SMH610 communication
headset.
The IP900 easily connects
to your intercom system with 3 pin XLR. It connects
to the LAN/WAN using CAT5 cable. Software is provided
on a USB memory stick. The program may be run directly
from the memory stick, or loaded onto the device.
Includes hardware and
software updates for one full year, factory assisted
setup, and a 3 year limited warranty.
|
|
|
|
|
|